Are you tired of juggling multiple remotes to control your TV, DVR, and other devices? Look no further. The U-verse S20 remote is designed to simplify your viewing experience by allowing you to control multiple devices with a single remote. In this article, we’ll take you through the process of programming your U-verse S20 remote, so you can enjoy seamless control over your entertainment system.
Before You Begin: Preparing Your Remote and Devices
Before you start programming your U-verse S20 remote, make sure you have the following:
- Your U-verse S20 remote control
- Your U-verse receiver (such as a DVR or cable box)
- The device you want to control (such as a TV, soundbar, or Blu-ray player)
- The device’s remote control (if applicable)
It’s also essential to ensure that your U-verse receiver is turned on and set to the correct input.
Understanding the U-verse S20 Remote Layout
Familiarize yourself with the U-verse S20 remote layout. The remote has several buttons and functions, including:
- Mode button: Switches between different device modes (such as TV, DVR, or AUX)
- OK button: Selects an option or confirms a setting
- Arrow buttons: Navigate through menus and options
- Number buttons: Enter channel numbers or access specific functions
- Volume and Channel buttons: Control the volume and channel on your TV or device
Programming Your U-verse S20 Remote: A Step-by-Step Guide
Programming your U-verse S20 remote involves setting up the remote to control your devices. Here’s a step-by-step guide to help you get started:
Step 1: Set Up Your U-verse Receiver
- Turn on your U-verse receiver and ensure it’s set to the correct input.
- Press the OK button on your U-verse S20 remote to access the menu.
- Navigate to Settings > Remote Control > Program Remote.
- Select Start to begin the programming process.
Step 2: Choose Your Device Type
- On your U-verse S20 remote, press the Mode button until you reach the device type you want to program (such as TV, DVR, or AUX).
- Press the OK button to select the device type.
Step 3: Enter the Device Code
- Using the Number buttons on your U-verse S20 remote, enter the device code for your device. You can find the device code in the U-verse S20 remote user manual or online.
- Press the OK button to confirm the device code.
Step 4: Test Your Remote
- Point your U-verse S20 remote at the device you’re trying to control.
- Press the Power button to turn the device on or off.
- Test the Volume and Channel buttons to ensure they’re working correctly.
Troubleshooting Common Issues
If you encounter any issues during the programming process, here are some troubleshooting tips to help you resolve them:
Device Not Responding
- Ensure the device is turned on and set to the correct input.
- Check that the device code is correct and try re-entering it.
- Try resetting the U-verse S20 remote by pressing the Mode button and the OK button simultaneously for 3 seconds.
Remote Not Controlling Multiple Devices
- Ensure that each device is set up correctly and has a unique device code.
- Try resetting the U-verse S20 remote and re-programming each device.
Additional Tips and Tricks
Here are some additional tips and tricks to help you get the most out of your U-verse S20 remote:
Using the AUX Mode
- The AUX mode allows you to control devices that don’t have a specific device code.
- To access the AUX mode, press the Mode button until you reach the AUX mode.
- Use the Number buttons to enter the device code for your AUX device.
Customizing Your Remote
- You can customize your U-verse S20 remote by assigning specific functions to certain buttons.
- To customize your remote, press the OK button and navigate to Settings > Remote Control > Customize Remote.
Conclusion
Programming your U-verse S20 remote is a straightforward process that can simplify your viewing experience. By following the steps outlined in this article, you can enjoy seamless control over your TV, DVR, and other devices. Remember to troubleshoot any issues that arise and take advantage of the additional tips and tricks to get the most out of your U-verse S20 remote.
| Device Type | Device Code |
|---|---|
| TV | 101, 102, 103, etc. |
| DVR | 201, 202, 203, etc. |
| AUX | 301, 302, 303, etc. |
Note: The device codes listed in the table are examples and may vary depending on the device manufacturer and model.
What is the U-verse S20 remote and how does it work?
The U-verse S20 remote is a universal remote control designed for use with AT&T U-verse TV systems. It allows users to control their TV, DVR, and other devices connected to their U-verse system. The remote uses infrared (IR) signals to communicate with devices, and it can be programmed to control multiple devices with a single remote.
To use the U-verse S20 remote, users need to program it to recognize their specific devices. This involves entering a series of codes that correspond to the device manufacturer and model. Once programmed, the remote can be used to control the device, including turning it on and off, changing channels, and adjusting volume.
How do I program my U-verse S20 remote to control my TV?
To program the U-verse S20 remote to control your TV, start by locating the TV code in the remote’s user manual or on the AT&T U-verse website. Enter the code using the remote’s keypad, and then press the “OK” button. The remote will then attempt to communicate with the TV using the entered code. If the code is correct, the TV should respond to the remote’s commands.
If the initial code does not work, you may need to try additional codes or use the remote’s “auto-search” feature to find the correct code. This feature allows the remote to automatically search for the correct code by sending a series of IR signals to the TV. Once the correct code is found, the remote will store it in memory for future use.
Can I program my U-verse S20 remote to control other devices, such as my DVD player or soundbar?
Yes, the U-verse S20 remote can be programmed to control other devices connected to your U-verse system, including DVD players, soundbars, and gaming consoles. To program the remote to control these devices, you will need to enter the corresponding device code using the remote’s keypad. The device code can usually be found in the device’s user manual or on the manufacturer’s website.
Once you have entered the device code, the remote will attempt to communicate with the device using the entered code. If the code is correct, the device should respond to the remote’s commands. You can then use the remote to control the device, including turning it on and off, playing media, and adjusting volume.
How do I reset my U-verse S20 remote to its factory settings?
To reset the U-verse S20 remote to its factory settings, press and hold the “OK” and “Menu” buttons simultaneously for 5 seconds. Release the buttons, and then press the “9-8-1” sequence on the keypad. The remote will then reset to its factory settings, erasing all previously programmed codes and settings.
After resetting the remote, you will need to reprogram it to control your devices. This involves re-entering the device codes and re-setting any custom settings you had previously configured. It’s a good idea to write down your device codes and settings before resetting the remote, so you can easily re-enter them later.
Why is my U-verse S20 remote not responding to commands?
If your U-verse S20 remote is not responding to commands, there are several possible causes. First, check that the batteries are installed correctly and have sufficient power. Weak or dead batteries can prevent the remote from functioning properly.
Next, check that the remote is programmed correctly to control your devices. If the device code is incorrect or has been erased, the remote will not be able to communicate with the device. Try re-entering the device code or using the remote’s “auto-search” feature to find the correct code. If the problem persists, try resetting the remote to its factory settings and reprogramming it from scratch.
Can I use my U-verse S20 remote to control multiple devices at the same time?
Yes, the U-verse S20 remote can be programmed to control multiple devices at the same time. This is known as “macro” programming, and it allows you to create custom commands that control multiple devices with a single button press.
To program a macro command, press and hold the “OK” button while pressing the button you want to assign the macro to. Then, enter the sequence of commands you want the macro to perform, using the remote’s keypad. For example, you could create a macro that turns on your TV, soundbar, and DVD player with a single button press.
How do I update the software on my U-verse S20 remote?
The U-verse S20 remote does not have updatable software. However, you can update the remote’s firmware by following the instructions provided by AT&T U-verse. Firmware updates can improve the remote’s performance and add new features.
To update the remote’s firmware, go to the AT&T U-verse website and follow the instructions for updating your remote’s firmware. You will need to enter your U-verse account information and follow the on-screen prompts to complete the update process. Once the update is complete, your remote should be running the latest firmware version.