The Onkyo TX-NR656 is a powerful and feature-rich home theater receiver that offers an immersive audio experience. However, like any electronic device, it can sometimes malfunction or become unresponsive due to various reasons such as software glitches, incorrect settings, or hardware issues. In such cases, resetting the device can often resolve the problem and restore it to its default settings. In this article, we will provide a step-by-step guide on how to reset your Onkyo TX-NR656 and troubleshoot common issues that may arise during the process.
Understanding the Reset Process
Before we dive into the reset process, it’s essential to understand the different types of resets available for the Onkyo TX-NR656. There are two primary types of resets: soft reset and hard reset. A soft reset restarts the device without erasing any of the saved settings, while a hard reset restores the device to its factory default settings, erasing all custom settings and configurations. It’s crucial to choose the right type of reset depending on the issue you’re experiencing with your device.
Pre-Reset Checklist
Before initiating the reset process, make sure to follow these essential steps:
Check the power cord and ensure it’s securely connected to both the device and the power outlet.
Verify that all cables, including HDMI, speaker, and network cables, are properly connected to the correct ports.
If you’re using a remote control, ensure it has fresh batteries and is functioning correctly.
Take note of your current settings, including the input mode, audio settings, and network configurations, as these will be lost during a hard reset.
Soft Reset: Restarting the Device
A soft reset is the simplest way to restart your Onkyo TX-NR656 without losing any of your custom settings. To perform a soft reset:
Press and hold the STANDBY/ON button on the front panel of the device until it turns off.
Release the button and wait for about 10 seconds.
Press the STANDBY/ON button again to turn on the device.
The device will restart, and you should see the Onkyo logo on the display.
Hard Reset: Restoring Factory Default Settings
If a soft reset doesn’t resolve the issue, you may need to perform a hard reset to restore the device to its factory default settings. To perform a hard reset:
Press and hold the STANDBY/ON button and the ENTER button on the remote control simultaneously for about 5 seconds.
Release the buttons when the device turns off.
Wait for about 10 seconds and then press the STANDBY/ON button to turn on the device.
The device will restart, and you’ll see the Onkyo logo on the display.
Follow the on-screen instructions to set up the device and configure your settings.
Troubleshooting Common Issues
During the reset process, you may encounter some common issues that can be easily resolved. Here are some troubleshooting tips:
If the device doesn’t turn on after a reset, check the power cord and ensure it’s securely connected to both the device and the power outlet.
If you’re experiencing audio issues after a reset, check the speaker connections and ensure they’re properly connected to the correct ports.
If you’re having trouble connecting to your network after a reset, restart your router and try reconnecting to the network.
Network Configuration
After a hard reset, you’ll need to reconfigure your network settings to connect to your home network. To do this:
Go to the Menu and select Network.
Select Network Setup and follow the on-screen instructions to connect to your network.
Enter your network password and select Connect to establish a connection.
Post-Reset Configuration
After resetting your Onkyo TX-NR656, you’ll need to reconfigure your settings to get the best out of your home theater system. Here are some essential settings to configure:
Audio settings: Configure your audio settings, including the input mode, audio format, and speaker settings.
Video settings: Configure your video settings, including the output resolution, HDMI settings, and display settings.
Network settings: Configure your network settings, including the network connection, streaming services, and online features.
Configuring Audio Settings
To configure your audio settings:
Go to the Menu and select Audio.
Select Input Mode and choose the correct input mode for your device.
Select Audio Format and choose the desired audio format, such as Dolby Atmos or DTS:X.
Configure your speaker settings, including the speaker size, distance, and level.
Configuring Video Settings
To configure your video settings:
Go to the Menu and select Video.
Select Output Resolution and choose the correct output resolution for your display device.
Select HDMI Settings and configure your HDMI settings, including the HDMI output, ARC, and CEC.
Configure your display settings, including the display mode, aspect ratio, and resolution.
Conclusion
Resetting your Onkyo TX-NR656 can be a straightforward process if you follow the steps outlined in this guide. By understanding the different types of resets and following the pre-reset checklist, you can ensure a smooth reset process and troubleshoot common issues that may arise. Remember to configure your settings after a reset to get the best out of your home theater system. With these tips and guidelines, you’ll be able to enjoy an immersive audio experience with your Onkyo TX-NR656.
| Reset Type | Description |
|---|---|
| Soft Reset | Restarts the device without erasing any saved settings |
| Hard Reset | Restores the device to its factory default settings, erasing all custom settings and configurations |
By following the steps outlined in this guide, you’ll be able to reset your Onkyo TX-NR656 and troubleshoot common issues that may arise during the process. Remember to always refer to your user manual for specific instructions and guidelines for your device. With the right knowledge and troubleshooting tips, you’ll be able to enjoy an immersive audio experience with your Onkyo TX-NR656.
What are the reasons to reset my Onkyo TX-NR656 home theater system?
Resetting your Onkyo TX-NR656 can be a useful troubleshooting step when you’re experiencing issues with your home theater system. Some common reasons to reset your system include resolving connectivity problems, fixing audio or video output issues, or restoring the system to its default settings after making changes that didn’t work out as planned. Additionally, if you’re selling or giving away your system, a reset can help ensure that all your personal settings and preferences are erased, providing a clean slate for the new owner.
Before you reset your system, it’s essential to understand that this process will erase all your custom settings, including input assignments, audio settings, and network configurations. Therefore, it’s a good idea to take note of your current settings or save them to a file, so you can easily restore them after the reset. It’s also important to be aware that a reset may not necessarily fix all issues, especially if they’re related to hardware problems or more complex software issues. In such cases, you may need to consult the user manual, contact Onkyo support, or seek the help of a professional to diagnose and resolve the problem.
How do I reset my Onkyo TX-NR656 to its factory default settings?
To reset your Onkyo TX-NR656, you’ll need to use a combination of buttons on the remote control and the front panel of the receiver. First, press and hold the “VCR/DVR” button on the remote control, then press the “On/Standby” button on the front panel while still holding the “VCR/DVR” button. Release both buttons when the display shows “Clearing…” and the system starts the reset process. Alternatively, you can also use the “Reset” button on the rear panel of the receiver, but this method requires a paper clip or a small pin to press the button.
It’s crucial to note that the reset process may take a few minutes to complete, during which time the system will restart and restore its default settings. Once the reset is complete, you’ll need to set up your system again, including configuring the input assignments, audio settings, and network connections. Make sure to refer to the user manual or online documentation for guidance on setting up your system, as the process can be complex and time-consuming. Additionally, if you’re not comfortable with the reset process or if you’re unsure about any aspect of it, it’s recommended to seek the help of a professional or contact Onkyo support for assistance.
What are the differences between a soft reset and a hard reset on the Onkyo TX-NR656?
A soft reset on the Onkyo TX-NR656 is a process that restarts the system without erasing any of your custom settings or preferences. This type of reset is useful when you’re experiencing minor issues, such as temporary connectivity problems or audio glitches, and you want to restart the system without losing your settings. On the other hand, a hard reset, also known as a factory reset, erases all your custom settings and restores the system to its default settings, as if it were brand new out of the box.
When deciding between a soft reset and a hard reset, it’s essential to consider the nature of the issue you’re experiencing and the potential consequences of each type of reset. If you’re unsure about which type of reset to perform, it’s recommended to start with a soft reset and see if it resolves the issue. If the problem persists, you may need to perform a hard reset, but be sure to take note of your custom settings beforehand, so you can easily restore them after the reset. It’s also a good idea to consult the user manual or online documentation for guidance on performing both types of resets.
Will a reset fix issues with my Onkyo TX-NR656’s network connectivity?
A reset may help resolve issues with your Onkyo TX-NR656’s network connectivity, but it’s not a guarantee. If you’re experiencing problems with connecting to your network, a reset can help restore the system’s default network settings, which may resolve the issue. However, if the problem is related to your network configuration, router settings, or internet service provider, a reset may not be enough to fix the issue. In such cases, you may need to consult your router’s documentation, contact your internet service provider, or seek the help of a professional to diagnose and resolve the problem.
Before performing a reset, it’s a good idea to try some basic troubleshooting steps to resolve network connectivity issues. These steps may include restarting your router, checking your network cables, and ensuring that your network settings are correct. If you’re still experiencing issues after trying these steps, a reset may be the next step. However, be sure to take note of your network settings beforehand, so you can easily restore them after the reset. Additionally, if you’re using a wireless network connection, you may need to re-enter your network password and other settings after the reset.
Can I reset my Onkyo TX-NR656 using the remote control only?
Unfortunately, it’s not possible to reset your Onkyo TX-NR656 using the remote control only. The reset process requires a combination of buttons on the remote control and the front panel of the receiver, as described in the user manual. While the remote control can be used to access some of the system’s settings and menus, it’s not capable of initiating a reset on its own. If you’re trying to reset your system, you’ll need to use the combination of buttons on the remote control and the front panel, or use the “Reset” button on the rear panel of the receiver.
It’s worth noting that some users may be tempted to try and reset their system using only the remote control, but this is not a recommended or supported method. Using the remote control alone may not initiate a proper reset, and could potentially cause more problems or damage to the system. To ensure a safe and successful reset, it’s essential to follow the instructions in the user manual and use the correct combination of buttons on the remote control and the front panel. If you’re unsure about any aspect of the reset process, it’s recommended to consult the user manual or contact Onkyo support for assistance.
How do I backup my settings before resetting my Onkyo TX-NR656?
Backing up your settings before resetting your Onkyo TX-NR656 is a crucial step to ensure that you don’t lose your custom configurations and preferences. While the system doesn’t have a built-in backup feature, you can take note of your settings manually or use a camera to take pictures of the settings menus. It’s also a good idea to save your settings to a file or document, so you can easily refer to them after the reset. Additionally, you can use the system’s “Print” function to print out a copy of your settings, if you have a printer connected to your network.
When backing up your settings, be sure to include all the relevant information, such as input assignments, audio settings, network configurations, and any other custom settings you’ve made. It’s also a good idea to take note of any firmware updates or software versions, so you can ensure that your system is up-to-date after the reset. By taking the time to backup your settings, you’ll be able to easily restore them after the reset and get your system up and running quickly. If you’re unsure about how to backup your settings or need help with the process, it’s recommended to consult the user manual or contact Onkyo support for assistance.
What should I do after resetting my Onkyo TX-NR656 to ensure proper functionality?
After resetting your Onkyo TX-NR656, it’s essential to take a few steps to ensure proper functionality and get your system up and running smoothly. First, you’ll need to set up your system again, including configuring the input assignments, audio settings, and network connections. Be sure to refer to the user manual or online documentation for guidance on setting up your system, as the process can be complex and time-consuming. Additionally, you may need to update your system’s firmware or software to ensure that you have the latest features and bug fixes.
Once you’ve set up your system, it’s a good idea to test all the functions and features to ensure that they’re working properly. This includes checking the audio and video output, testing the network connectivity, and verifying that all the inputs and outputs are functioning correctly. If you encounter any issues or problems during the setup process, don’t hesitate to consult the user manual or contact Onkyo support for assistance. By taking the time to properly set up and test your system after a reset, you’ll be able to enjoy optimal performance and functionality from your Onkyo TX-NR656 home theater system.